TPU 3D Filament Natural / Opaque, 2,300 g, 2.85 mm

129,95 EUR
56,50 EUR per kg
19 % VAT incl. excl. Shipping costs
Shipping time: On request.
Product no.: 7212302
Manufacturer: Orbi-Tech
More products of: Orbi-Tech


  • Products description

    One spool with plastic filament out of TPU in Natural / Opaque. Its hardness is ~ Shore A 92.

    TPU is an elastic, very flexible and soft material that is almost odorless. It is similar to rubber. TPU is resistant to oils and grease and it is very resistant to abrasion. Our TPU contains no plasticizers and is allergy-friendly and non-irritating to the skin. TPU is resistant to hydrolysis and mikrobendbeständig. TPU has an elongation at yield of about 600%. The density of TPU is approximately thirty percent higher than the density of TPE. The layer adhesion of TPU is very good.

    We recommend to print soft materials
    very slow, at 15 - 45 mm / s and at about 210 - 240 ° C. The printing bed has not to be heated. The object should be cooled. The filament needs to be guided very well between feed wheel and nozzle, so that the filament does not bend.

    TPU is best pre-dried. For example, in an oven at about 80 ° C for 2-4 hours.

    Typical applications include drive belts, profiles, shoes or shoe soles, objects with soft touch, such as cell phone cases.

    Nominal diameter 2.85 mm  
    Material TPU / thermoplastic polyurethane
    Colour Natural / Opaque  
    Hardness: Shore ~ 92 A  
    Length ~ 290 meter  
    Weight approx. 2,300 g (without blank spool)  
    Dimension (reel) outer Ø ~ 300 mm, width ~ 100 mm  

    This filament can be used for 3D Printer and Rapid Prototyper.

  • Product Features

    Material:
    TPU
    Weight:
    2.300 g
    Diameter:
    2,85 mm
    Color:
    Natural
    Length:
    ~95 m
    Density:
    1.2 g/cm3
    Processing temperature:
    210-220°C
    Printing plate:
    ~70°C
    Tensile strength:
    ~40 MPa
    Tensile strain:
    ~600%
    E-Modulus:
    ~12 MPa
    Delivery form:
    Spool 300x110mm, hole 51mm, tare weight ~ 600 g
  • Recommended products:

    Top
    3Dlac PLUS - 100 ml Adhesion agent for 3D-printing

    3Dlac PLUS - 100 ml Adhesion agent for 3D-printing

  • Customers who bought this product also bought the following products:

    TPU 3D Filament Transparent, 750 g, 2.85 mm

    TPU 3D Filament Transparent, 750 g, 2.85 mm