Lay-Fomm 60 3D Filament 1.75 mm 250 g

28,50 EUR
114,00 EUR per kg
19 % VAT incl. excl. Shipping costs
Product no.: 7373101
Manufacturer: LAYFilaments
More products of: LAYFilaments


  • Products description

    Lay-Fomm is micro-porous and elastic. The size of the pores is in the micrometer range.

    With Lay-Fomm rubbery and soft objects can be printed.

    Poro-Lay Lay-Fomm LayFilaments

    The material consists of two parts: an elastomer that is responsible for the rubber-like feel and material property, and a water-soluble ingredient. After printing, the object is placed in water whereby after one and four days, leaving behind the elastomer, and thus the soft porous object.

    Lay-Fomm 60 has a Shore hardness of ~ A 60. Lay-Fomm 40 has a Shore hardness of A ~ 40th

    Rinse in water:
    - print thin walls and heep filling rate as low as possible to shorten the time for rinsing
    - gently rinse with water, hot water and patience provides good results
    - you can clearly notice the effect and that the material is getting softer after one day
    - after three days every PVA should be gone
    - stir and change the water often
    - you can reduce the rinsing time by using an ultrasonic cleaner
    - remaining water can be removed from the object quickly by using a clothes dryer
    - repeatedly rinsing: fresh water ? Wait ? Dryer ? fresh water ? Wait ? Dryer
    - PVA residues feel greasy, like sugar syrup
    - remove all PVA residues

    Poro-Lay are experimental filaments for experimental and experienced user. Help for processing and a great ideas for new 3D objects can be found in the prestigious forums.

    The components of Poro-Lay are harmless and food safe. The water-soluble component is even biocompatible. However, we strongly advise not to eat the material.

    Poro-Lay is best stored dry. If the material absorbed moisture after some time, the filament can be dryed in an oven at about 80 ° C for four to five hours. We recommend to dry the filament before the very first print.

    Nominal diameter 1.75 mm  
    Material Lay-Fomm 40
    Colour beige  
    Hardness: ~ Shore A 60  
    Printing temperature 220 - 230 °C  
    Heated bed not necessary, likely 50 °C  
    Length >  meter  
    Weight approx. 250 g  

    The filament comes in a reseable zip bag.

  • Product Features

    Material:
    Lay-Fomm
    Weight:
    250 g
    Diameter:
    1.75 mm
    Delivery form:
    Coil
  • Recommended products:

    Top
    3Dlac PLUS - 100 ml Adhesion agent for 3D-printing

    3Dlac PLUS - 100 ml Adhesion agent for 3D-printing

  • Customers who bought this product also bought the following products:

    Lay-Fomm 40 3D Filament 1.75 mm 250 g

    Lay-Fomm 40 3D Filament 1.75 mm 250 g

    LayBrick Stone 3D Filament 1.75 mm, 250 g

    LayBrick Stone 3D Filament 1.75 mm, 250 g

    LayWoo-d3 FLEX 3D Wood Filament 1.75 mm, 250 g

    LayWoo-d3 FLEX 3D Wood Filament 1.75 mm, 250 g

    Lay-Felt 3D Filament 1.75 mm 250 g

    Lay-Felt 3D Filament 1.75 mm 250 g

    Gel-Lay 3D Filament 1.75 mm 250 g

    Gel-Lay 3D Filament 1.75 mm 250 g

    Reflect-O-Lay Filament 1.75 mm, 250 g

    Reflect-O-Lay Filament 1.75 mm, 250 g