One spool with plastic filament out of PLA in light-green.
PLA Standard is a hard material that is bendable like PS.
|Nominal diameter||1.75 mm|
|Material||rigid Standard Polylactic Acid / Polylactide|
|Length||> 260 meter|
|Weight||approx. 750 g (without blank spool)|
|Dimension (reel)||outer Ø ~ 200 mm, width ~ 55 mm|
Our PLA is suitable for 3D printers with or without Heated Bed. If you are not using a Heated Bed, we recommend to use a suitable tape on the printing plate and, if necessary, to roughen it. Do you want to print with activated Heated Print Bed, we recommend temperatures of 40 to 60 ° C.
The temperature for the Hotend is depends heavily on its precision and more than that of the printing speed.
You will get very good printing results with temperatures from 195 to 240 °C at print speeds from 35 to 100 mm/.
PLA has very minimal shrinkage (warp) for easy printing of detailed objects.
We manufacture the filament with great care. Diameter and roundness are controlled with high-precision laser-supported instruments.
The homogeneity and good flow properties provide high-quality printing results.
No danger to your health: This filament does not contain any hazardous chemical substances. The material is harmless in contact with the human skin and in contact with food. The material meets the requirement of the European Union Food Contact Regulation (EU) and the US Food and Drug Administration (FDA).
This filament is RoHS certified and REACH compliant.