HiPS Filament 1.75 mm, 750g, green

18,00 EUR
24,00 EUR per kg
19 % VAT incl. excl. Shipping costs
Product no.: 7107111
Manufacturer: Orbi-Tech
More products of: Orbi-Tech


  • Products description

    750 g HiPS in Green wound on a spool.

    HiPS is a well established plastic for 3d printing that is lighter than ABS.

    Advantages of HiPS:

    - lighter than ABS or PLA
    - tough and scratch-resistant surface
    - easy to rework (gluing, sanding, painting)
    - intensive, satin color
    - dissolvable in Limonen

    High Quality guaranteed:

    -very low tolerances of the diameter
    -very good roundness
    -well selected raw material
    -suitable for all 3D printer

    HIPS plastic is similar to ABS with its high strength and resistance. Technical parts are often made of this lightweight and high-quality material. Plastic casings and models are made out of HIPS. HIPS has a lower toughness as ABS and is thus more fragile when subjected to impact.

    HIPS can be printed just as good as ABS, it has a slightly better flow behavior than ABS and can therefore be printed at a slightly lower temperature.

    Upon cooling, HiPS shrinks almost as much as ABS. The greater and faster the temperature difference drops, the more even HiPS gets deformed (warp). We therefore recommend the usage of a Heated Bed. You may preheat the plate to 70-100 ° C.

    Because of the warpage, the first layer has to stick to the surface. You will get a strong bond using ABS-paint or print on a PEI plate or a raft.

    High-precision prints are achievable with our HiPS. And the beautiful colors make the use limitless. 

    HIPS dissolves in lime but not in acetone.

    It is resistant to oils, grease and alkalis. HIPS is not resistant to fuel.

    The HiPS filament is supplied wound on a spool, for smooth printing processes without knotting of the material as it is possible with coils.

    Our HiPS offers excellent printing results with a clean and smooth surface, is food-safe, REACh and RoHS conform.

    Nominal diameter 1.75 mm  
    Material High Impact Polystyrene
    Colour green  
    Length > 310 meter  
    Weight approx. 750 g (without blank spool)  
    Dimension (reel) outer Ø ~ 200 mm, width ~ 55 mm  

    This wire is primarily used for 3D Printer and Rapid Prototyper.

    If foam comes out of the nozzle, the material has to be dried at ~ 75°C for two hours.

  • Product Features

    Material:
    HiPS
    Weight:
    750 g
    Diameter:
    1.75mm
    Color:
    Green
    Length:
    ~315 m
    Density:
    1.04 g/cm3
    Processing temperature:
    230-250°C
    Printing plate:
    ~90°C
    Softening temperature:
    ~95°C Vicat A
    Tensile strength:
    ~25 MPa
    Tensile strain:
    ~1.5%
    E-Modulus:
    ~1,990 MPa
    Harmlessness:
    EU food safe & FDA conform
    Reach & RoHS conform:
    Reach & RoHS konform
    Delivery form:
    Spool 200x55m, hole 51mm, tare weight ~ 225 g
  • Recommended products:

    Limonene - Solvent for HiPS 3x 250 ml

    Limonene - Solvent for HiPS 3x 250 ml

    Limonene - Solvent for HiPS 500 ml

    Limonene - Solvent for HiPS 500 ml

    Limonene - Solvent for HiPS 1,000 ml

    Limonene - Solvent for HiPS 1,000 ml

    This product is compatible with:

    ABS 3D Filament 1.75 mm, 2,300 g Green

    ABS 3D Filament 1.75 mm, 2,300 g Green

  • Customers who bought this product also bought the following products:

    Limonene - Solvent for HiPS 3x 250 ml

    Limonene - Solvent for HiPS 3x 250 ml