Products description
One spool with 750 g ABS in Natural wound on spool.
Advantages of ABS:
- higher impact resistance and more flexible than PLA
- tough and scratch-resistant surface
- easy to rework (gluing, sanding, painting)
- intensive, satin colorHigh Quality guaranteed:
-very low tolerances of the diameter
-very good roundness
-well selected raw material
-suitable for all 3D printerDue to its high temperature resistance, this plastic is suitable for applications where PLA already gets soft. The heat distortion temperature of ABS at about 100 ° C and it is more impact-resistant and lighter than PLA.
Upon cooling, ABS shrinks more than PLA. The greater and faster the temperature difference drops, the more ABS gets deformed (warp). We therefore recommend the usage of a Heated Bed. You may preheat the plate to 80-110 ° C.
Because of the warpage, the first layer has to stick to the surface. You will get a strong bond using ABS-paint or print on a PEI plate or a raft.
High-precision prints are achievable with our ABS. And the beautiful colors make the use limitless.
ABS is resistant to oil and grease, alkalis and fuel.
ABS dissolves in acetone but not in Limonen.If you use a Dual-Extruder with HiPS as support material, you can remove the HiPS with Limonen. The ABS structure remains intact.
ABS can be welded, glued and painted or galvanized after pretreatment.
The ABS filament is supplied wound on a spool, for smooth printing processes without knotting of the material as it is possible with coils.
Nominal diameter 1.75 mm Material ABS / Acrylnitril Butadien Styrene Colour natural Length > 300 meter Weight approx. 750 g (without blank spool) Dimension (reel) outer Ø ~ 200 mm, width ~ 55 mm This wire is primarily used for 3D Printer and Rapid Prototyper.
If foam comes out of the nozzle, the material has to be dried at ~ 75°C for two hours.
Product Features
Material:ABSWeight:750 gDiameter:1.75 mmColor:NaturalLength:~300 mDensity:1.05 g/cm3Processing temperature:255°CPrinting plate:~105°CSoftening temperature:~100°C Vicat ATensile strength:~45 MPaTensile strain:~2.6%E-Modulus:~2,190 MPaHarmlessness:EU food safe & FDA conformReach & RoHS conform:Reach & RoHS konformDelivery form:Spool 200x55m, hole 51mm, tare weight ~ 225 gRecommended products:
Customers who bought this product also bought the following products:
-
32
Your shopping cart contains the following products:
- 1 x PLA 3D Filament 1.75 mm, 2,300 g, Met...
- 1 x Soft PLA 3D Filament 2.85 mm, 2,300 g...
- 1 x PE-HD Welding Rod 3 mm 2.2 kg on spoo...
- 1 x Round nozzle 30 mm - 5 mm
- 1 x PVC Repair-Sticks (25 Sticks at 20 cm...
- 1 x PET 3D Filament 1.75 mm, 2,300 g, Yellow
- 1 x PE Repair-Sticks (25 Sticks at 20 cm)...
- 1 x PP Welding Rod 4 mm 2.2 kg on spool, ...
- 1 x PE Repair-Sticks (25 Sticks at 20 cm)...
- 1 x LayWoo-d3 FLEX 3D Wood Filament 2.85 ...
- 1 x Reflect-O-Lay Filament 1.75 mm, 250 g
- 1 x PP-EPDM Repair-Sticks (25 Sticks at 2...
- 1 x ABS 3D Filament 1.75 mm, 750 g Pink /...
- 1 x HiPS Filament 2.85 mm, 750g, white
- 1 x PET 3D Filament 1.75 mm, 2,300 g, Yel...
- 1 x PE Repair-Sticks (25 Sticks at 20 cm)...
- 1 x Hot Air Gun Steinel HG 2420 E with case
- 1 x Flex Polypropylene Welding Rod 3 mm 2...
- 1 x ASA 3D Filament 1.75 mm, 750 g on spo...
- 1 x ABS 3D Filament 1.75 mm, 750 g Blue
- 1 x Hot Air Gun Steinel HL 1920 E
- 1 x PLA 3D Filament 1.75 mm, 750 g, Magenta
- 1 x Plastic Repair Kit G-80
- 1 x HiPS Filament 1.75 mm, 750g, natural
- 1 x ASA 3 mm, 2.2 kg on spool, Black
- 1 x Hot Air Gun Steinel HG 2520 E with case
- 1 x LayWoo-d3 FLEX 3D Wood Filament 1.75 ...
- 1 x PP-EPDM Welding Rod 4 mm 2.2 kg on sp...
- 1 x smartABS 3D Filament, 1.75 mm, 750 g,...
- 1 x PE-HD Repair-Sticks (25 Sticks at 20 ...
- 1 x Soft PLA 3D Filament 2.85 mm, 2,300 g...
- 1 x ABS 3D Filament 1.75 mm, 750 g Natural
-