Products description
ABS Tranparent 750 g wound on spool.
SALE-Item. Available only while stocks last. At a special price.
- No yellow discoloration like PLA
- Bendable and resistant
Advantages of ABS:
- higher impact resistance and more flexible than PLA
- tough and scratch-resistant surface
- easy to rework (gluing, sanding, painting)
- intensive, satin colorHigh Quality guaranteed:
-very low tolerances of the diameter
-very good roundness
-well selected raw material
-suitable for all 3D printerDue to its high temperature resistance, this plastic is suitable for applications where PLA already gets soft. The heat distortion temperature of ABS at about 100 ° C and it is more impact-resistant and lighter than PLA.
Upon cooling, ABS shrinks more than PLA. The greater and faster the temperature difference drops, the more ABS gets deformed (warp). We therefore recommend the usage of a Heated Bed. You may preheat the plate to 80-110 ° C.
Because of the warpage, the first layer has to stick to the surface. You will get a strong bond using ABS-paint or print on a PEI plate or a raft.
High-precision prints are achievable with our ABS. And the beautiful colors make the use limitless.
ABS is resistant to oil and grease, alkalis and fuel.
ABS dissolves in acetone but not in Limonen.If you use a Dual-Extruder with HiPS as support material, you can remove the HiPS with Limonen. The ABS structure remains intact.
ABS can be welded, glued and painted or galvanized after pretreatment.
Nominal diameter 1.75 mm Material ABS / Acrylnitril Butadien Styrene Colour transparent Length > 300 meter Weight approx. 750 g (without blank spool) Dimension (reel) outer Ø ~ 200 mm, width ~ 55 mm This wire is primarily used for 3D Printer and Rapid Prototyper.
If foam comes out of the nozzle, the material has to be dried at ~ 75°C for two hours.
No danger to your health: This filament does not contain any hazardous chemical substances. The material is harmless in contact with the human skin and in contact with food. The material meets the requirement of the European Union Food Contact Regulation (EU) and the US Food and Drug Administration (FDA).
This filament is RoHS certified and REACH compliant.Product Features
Material:ABSWeight:750 gDiameter:1.75 mmColor:Natural , TransparentLength:~300 mDensity:1.09 g/cm3Processing temperature:255°CPrinting plate:~105°CSoftening temperature:~105°C Vicat ATensile strength:~45 MPaTensile strain:~4.0%E-Modulus:~1,990 MPaDelivery form:Spool 200x55m, hole 51mm, tare weight ~ 225 gCustomers who bought this product also bought the following products:
-
1
Your shopping cart contains the following products:
-