ABS 3D Filament 1.75 mm, 750 g Natural

18,00 EUR
24,01 EUR per kg
19 % VAT incl. excl. Shipping costs
Product no.: 7017101
Manufacturer: Orbi-Tech
More products of: Orbi-Tech


  • Products description

    One spool with 750 g ABS in Natural wound on spool.

    Advantages of ABS:

    - higher impact resistance and more flexible than PLA
    - tough and scratch-resistant surface
    - easy to rework (gluing, sanding, painting)
    - intensive, satin color

    High Quality guaranteed:

    -very low tolerances of the diameter
    -very good roundness
    -well selected raw material
    -suitable for all 3D printer

    Due to its high temperature resistance, this plastic is suitable for applications where PLA already gets soft. The heat distortion temperature of ABS at about 100 ° C and it is more impact-resistant and lighter than PLA.

    Upon cooling, ABS shrinks more than PLA. The greater and faster the temperature difference drops, the more ABS gets deformed (warp). We therefore recommend the usage of a Heated Bed. You may preheat the plate to 80-110 ° C.

    Because of the warpage, the first layer has to stick to the surface. You will get a strong bond using ABS-paint or print on a PEI plate or a raft.

    High-precision prints are achievable with our ABS. And the beautiful colors make the use limitless.

    ABS is resistant to oil and grease, alkalis and fuel.
    ABS dissolves in acetone but not in Limonen.

    If you use a Dual-Extruder with HiPS as support material, you can remove the HiPS with Limonen. The ABS structure remains intact.

    ABS can be welded, glued and painted or galvanized after pretreatment.

    The ABS filament is supplied wound on a spool, for smooth printing processes without knotting of the material as it is possible with coils.

     

    Nominal diameter 1.75 mm  
    Material ABS / Acrylnitril Butadien Styrene
    Colour natural  
    Length > 300 meter  
    Weight approx. 750 g (without blank spool)  
    Dimension (reel) outer Ø ~ 200 mm, width ~ 55 mm  

    This wire is primarily used for 3D Printer and Rapid Prototyper.

    If foam comes out of the nozzle, the material has to be dried at ~ 75°C for two hours.

  • Product Features

    Material:
    ABS
    Weight:
    750 g
    Diameter:
    1.75 mm
    Color:
    Natural
    Length:
    ~300 m
    Density:
    1.05 g/cm3
    Processing temperature:
    255°C
    Printing plate:
    ~105°C
    Softening temperature:
    ~100°C Vicat A
    Tensile strength:
    ~45 MPa
    Tensile strain:
    ~2.6%
    E-Modulus:
    ~2,190 MPa
    Harmlessness:
    EU food safe & FDA conform
    Reach & RoHS conform:
    Reach & RoHS konform
    Delivery form:
    Spool 200x55m, hole 51mm, tare weight ~ 225 g
  • Recommended products:

    Top
    3Dlac PLUS - 100 ml Adhesion agent for 3D-printing

    3Dlac PLUS - 100 ml Adhesion agent for 3D-printing

  • Customers who bought this product also bought the following products:

    PC Filament, 1.75 mm, 750 g, glass-clear / transparent

    PC Filament, 1.75 mm, 750 g, glass-clear / transparent

    ABS 3D Filament 1.75 mm, 750 g Yellow

    ABS 3D Filament 1.75 mm, 750 g Yellow

    Sale
    ABS 3D Filament 1.75 mm, 750 g Clear / transparent

    ABS 3D Filament 1.75 mm, 750 g Clear / transparent

    PET 3D Filament 1.75 mm, 750 g, White

    PET 3D Filament 1.75 mm, 750 g, White

    ABS 3D Filament 1.75 mm, 750 g Black

    ABS 3D Filament 1.75 mm, 750 g Black

    ASA 3D Filament 1.75 mm, 750 g on spool, Luminous-Yellow

    ASA 3D Filament 1.75 mm, 750 g on spool, Luminous-Yellow