MoldLay is a wax alike material. You can build casting moulds and create objects for the lost wax process. The 2,300 g are wound on a spool.
Advantages of MoldLay:
-almost no warp
-low viscosity at high temperature
-very good dimensional stability
-solid and keeps its shape
-no heated bed necessary
-low processing temperature (~ 170 - 185°C)
-liquefies at ~. 270°C (emptying the cast)
Mold-Lay is an experimental filament for experimental and experienced user. Help for processing and a great ideas for new 3D objects can be found in the prestigious forums.
Poro-Lay is best stored dry. If the material absorbed moisture after some time, the filament can be dryed in an oven at max. 40 ° C for four to five hours.
Nominal diameter 2.85 mm Material MoldLay Colour blue Printing temperature 170 - 185 °C Heated bed not necessary, max. 40 °C Length ~ 270 meter Weight approx. 2,300 g
The filament comes in a reseable zip bag.
Product FeaturesMaterial:Mold-LayWeight:2.300 gDiameter:2,85 mmColor:BlueLength:~270 mDensity:1.18 g/cm3Processing temperature:185-215 °CPrinting plate:~20-30 °CSoftening temperature:~55°C Vicat ATensile strength:~42 MPaTensile strain:~20%E-Modulus:~1,950 MPaHarmlessness:not specifiedReach & RoHS conform:Reach & RoHS konformDelivery form:Spool 300x110mm, hole 51mm, tare weight ~ 600 g